Inleiding

With this guide you will learn how to replace faulty battery spring contacts that may have been disconnected from motherboard or corroded by and exploding battery.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

    Voeg opmerking toe

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

    Voeg opmerking toe

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    Voeg opmerking toe

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    Voeg opmerking toe

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    Voeg opmerking toe

    • You now have access to all components found on the inside of the device!

    Voeg opmerking toe

    • Locate both battery spring contacts, if necessary, on the motherboard.

    Voeg opmerking toe

    • Apply heated soldering iron to points where the contacts are soldered to the motherboard.

    Voeg opmerking toe

    • Soldering irons, when heated, are very hot and can potentially burn the user.

    • Be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    Voeg opmerking toe

    • With solder melted, remove battery spring contacts from the motherboard.

    Voeg opmerking toe

    • Replace spring contacts with new ones.

    Voeg opmerking toe

    • There may be some solder in the way of the spring contacts' metal contacts. If this occurs simply melt the solder to create room for the contacts.

    Voeg opmerking toe

    • With the new battery spring contacts in place, use the soldering iron to apply new solder to the connection points.

    • Be sure to allow the new solder to cool and harden.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

James Thorne

Lid sinds: 05-11-13

625 Reputatie

6 handleidingen geschreven

Team

UMass Dartmouth, Team 1-8, Shastany Fall 2013 Lid van UMass Dartmouth, Team 1-8, Shastany Fall 2013

UMASSD-SHASTANY-F13S1G8

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 6

Altijd: 363