Repareer je spullen Gemeenschap Winkel

Samsung U28E510 Jog Button Replacement

Inleiding

This guide will assist users to replace a damaged or nonoperational jog button.

Wat je nodig hebt

  1. Samsung U28E510 Jog Button Replacement, Jog Button: stap 1, afbeelding 1 van 3 Samsung U28E510 Jog Button Replacement, Jog Button: stap 1, afbeelding 2 van 3 Samsung U28E510 Jog Button Replacement, Jog Button: stap 1, afbeelding 3 van 3

    • Start by removing the screen bezel.

    • Use a pair of spudgers to pry between the bezel and the rest of the monitor.

    • Ideally use plastic tools as this step could damage the edges of the screencover.

    • lay monitor on its back and pull off screen cover.

    Bewerken

  3. Samsung U28E510 Jog Button Replacement: stap 2, afbeelding 1 van 2 Samsung U28E510 Jog Button Replacement: stap 2, afbeelding 2 van 2

    • Flip the monitor over so that it is facedown.

    • remove the single screw in the middle using a #2 Phillips screwdriver.

    • Remove the backing to reveal the Jog Button.

    Bewerken

  4. Samsung U28E510 Jog Button Replacement: stap 3, afbeelding 1 van 1

    • Disconnect signal cable to power supply board.

    • Remove and replace jog button.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order. Ensure the bezel completely snaps in place all around monitor.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Jake Ritter

Lid sinds: 01/22/18

106 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

Team

Cal Poly, Team S11-G1, Banghart Winter 2018 Lid van Cal Poly, Team S11-G1, Banghart Winter 2018

CPSU-BANGHART-W18S11G1

4 Leden

6 handleidingen geschreven

5 opmerkingen

i have a samsung u28d590d and it works just the same. simple and easy as the guide says.

joshsc2 - Antwoord

Does anyone have the part number or where I can buy the new jog button?

Kyle Gulliford - Antwoord

“bn96-32135b “

Gary Deon -

this is the part number i found BN96-32135B

Gary Deon - Antwoord

the button on my monitor wasn't working anymore - pressing it didn't do anything. So I decided to follow this great guide. When I removed the top of the button and put it on again, I noticed that it worked again. Seems that there had been just to many dust.

Thanx for this guide!

Ralf D. Müller - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 85

Altijd: 6,523