1. Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
    • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

    Voeg opmerking toe

  2. Remove the screw on each side of the device using a Phillips head screwdriver.
    • Remove the screw on each side of the device using a Phillips head screwdriver.

    Voeg opmerking toe

    • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

    • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

    Voeg opmerking toe

    • Once the back cover has been removed the battery will be visible.

    • Pry the battery from the device.

      • NOTE: The battery should still be connected to the device

    Voeg opmerking toe

    • Unplug the battery connecting cables.

      • NOTE: The battery now should be free from all connections to the device.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Dylan Peters

Lid sinds: 18-10-13

404 Reputatie

4 handleidingen geschreven

Team

Clemson, Team 14-8, Benson Fall 2013 Lid van Clemson, Team 14-8, Benson Fall 2013

CLEM-BENSON-F13S14G8

3 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 8

Altijd: 1,162