Inleiding

This is a step by step guide on how to replace the Samsung SPH-A500 logic board.

Onderdelen

Geen onderdelen nodig.

  1. Turn phone over
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

  2. Remove the battery from the phone, which will reveal four screws at the corners of the phone.
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

    • Pull the side tabs outward while simultaneously lifting up the circuit board.

    • Do not completely pull out the circuit board.

    • Look for the clip at the top right corner of the logic board.

    • Remove the clip from the logic board.

    • Remove the logic board.

    • Replace the broken logic board with a new one.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nick Dominikovic

Lid sinds: 13-04-10

139 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 18-100, Johann Spring 2010 Lid van Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Leden

10 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 1,882