Ga door naar hoofdinhoud

Samsung SGH-A737 Camera Replacement

Wat je nodig hebt

  1. Samsung SGH-A737 Camera  Replacement, Equipment and Tools: stap 1, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Equipment and Tools: stap 1, afbeelding 2 van 2
    • Gather all the materials required prior to the teardown.

    • A Phillips PH000 screw head and screwdriver are the only required tools for this guide.

    • Make sure to use the correct screwdriver head in order to avoid damaging screw heads.

    • Avoid over tightening the screws to avoid damaging them.

  2. Samsung SGH-A737 Camera  Replacement, Battery: stap 2, afbeelding 1 van 3 Samsung SGH-A737 Camera  Replacement, Battery: stap 2, afbeelding 2 van 3 Samsung SGH-A737 Camera  Replacement, Battery: stap 2, afbeelding 3 van 3
    • Remove the battery from the back of the device.

    • To do this, slide the battery cover off the rear side of the phone.

    • Once the rear cover is removed, the battery should easily pop out of the phone.

  3. Samsung SGH-A737 Camera  Replacement, Back Cover: stap 3, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Back Cover: stap 3, afbeelding 2 van 2
    • Using the screwdriver, unscrew the six visible screw drivers on the back of the phone.

    • Be sure to use the proper size of screwdriver. If you don't you may risk damaging the outer container of the device.

  4. Samsung SGH-A737 Camera  Replacement, Side Buttons: stap 4, afbeelding 1 van 1
    • Next, remove the side buttons by gently prying them off.

    • When the phone is reassembled, these buttons will be placed back in their appropriate holder.

  5. Samsung SGH-A737 Camera  Replacement, Circuit Board: stap 5, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Circuit Board: stap 5, afbeelding 2 van 2
    • With care, lift up the connector located at the bottom left of the phone, as demonstrated in the accompanying image.

  6. Samsung SGH-A737 Camera  Replacement, Circuit Board Continued: stap 6, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Circuit Board Continued: stap 6, afbeelding 2 van 2
    • Flip the circuit board up to unveil an orange connector near bottom of it.

    • Gently unplug the connector by prying on the corner with a finger.

  7. Samsung SGH-A737 Camera  Replacement, Circuit Board Holder: stap 7, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Circuit Board Holder: stap 7, afbeelding 2 van 2
    • Lift up the tan circuit board holder to separate it from the device.

  8. Samsung SGH-A737 Camera  Replacement, Sliding Panel: stap 8, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Sliding Panel: stap 8, afbeelding 2 van 2
    • Peel off the black strip below the product sticker, unveiling two screws and unscrew them.

    • There are two more screws slightly below that need to be unscrewed as well.

    • Be sure to use the proper size screwdriver. Using the wrong size can cause damage to the case!

  9. Samsung SGH-A737 Camera  Replacement, Sliding Panel Continued: stap 9, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Sliding Panel Continued: stap 9, afbeelding 2 van 2
    • Make sure the phone is closed. If not slide it closed now.

    • Next, carefully detach the blue plastic panel from the phone. It should already be slightly loose.

    • When sliding the connector through the rectangular gap, be sure to do so gently in order to avoid any damage.

  10. Samsung SGH-A737 Camera  Replacement, Camera Panel: stap 10, afbeelding 1 van 2 Samsung SGH-A737 Camera  Replacement, Camera Panel: stap 10, afbeelding 2 van 2
    • Begin by removing the six visible screws located on the outer edge of the device.

    • Once the screws are removed, gently separate the panel to unveil the circuits and camera.

  11. Samsung SGH-A737 Camera  Replacement, Camera Replacement: stap 11, afbeelding 1 van 3 Samsung SGH-A737 Camera  Replacement, Camera Replacement: stap 11, afbeelding 2 van 3 Samsung SGH-A737 Camera  Replacement, Camera Replacement: stap 11, afbeelding 3 van 3
    • Be sure to perform these steps using as little force as possible. The circuit boards can be delicate!

    • To disconnect the camera, gently lift the tan flap away from the camera where the orange connector is attached. This should loosen the wire.

    • Next, pry up on the camera to dislodge it. This may require some force.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tommy

Lid sinds: 02/19/16

101 Reputatie

2 handleidingen geschreven

Team

Ohio State, Team 1-3, Garvin Spring 2016 Lid van Ohio State, Team 1-3, Garvin Spring 2016

OSU-GARVIN-S16S1G3

4 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 270