Inleiding

It may become necessary to replace the logic board on this cell phone in order to correct a problem. Following this guide will make removal quite easy.

Slide the latch on the back of the phone up.
  • Slide the latch on the back of the phone up.

Voeg opmerking toe

Remove the battery.
  • Remove the battery.

Voeg opmerking toe

After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
  • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

Voeg opmerking toe

Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
  • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

Voeg opmerking toe

With a #0 Phillips screwdriver remove the screw which you just uncovered.
  • With a #0 Phillips screwdriver remove the screw which you just uncovered.

Voeg opmerking toe

Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
  • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

  • Then disconnect the small power connector near the top of the phone.

Voeg opmerking toe

Gently pry up the ribbon-type connector with the spudger.
  • Gently pry up the ribbon-type connector with the spudger.

Voeg opmerking toe

Carefully pry the logic board from the case with the spudger.
  • Carefully pry the logic board from the case with the spudger.

Voeg opmerking toe

Eindstreep

Nathan Brink

Lid sinds: 11-04-10

1 Reputatie

14 handleidingen geschreven

Team

Cal Poly, Team 34-59, Forte Spring 2010 Lid van Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 2,626