Inleiding

The Keypad may get worn or dirty as time goes by. This guide will aid in the removal of the keypad for cleaning or replacement.

Slide the latch on the back of the phone up.
  • Slide the latch on the back of the phone up.

Voeg opmerking toe

Remove the battery.
  • Remove the battery.

Voeg opmerking toe

  • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

Voeg opmerking toe

  • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

Voeg opmerking toe

  • With a #0 Phillips screwdriver remove the screw which you just uncovered.

Voeg opmerking toe

  • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

  • Then disconnect the small power connector near the top of the phone.

Voeg opmerking toe

  • Gently pry up the ribbon-type connector with the spudger.

Voeg opmerking toe

  • Carefully pry the logic board from the case with the spudger.

Voeg opmerking toe

  • Once the logic board has been removed, peel the keypad up.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nathan Brink

Lid sinds: 11-04-10

1 Reputatie

14 handleidingen geschreven

Team

Cal Poly, Team 34-59, Forte Spring 2010 Lid van Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 6

Altijd: 1,484