Ga door naar hoofdinhoud

Inleiding

When you use your camcorder to record video, you’ll find that the hand strap is one of the most useful components to stabilize your image/video. The hand strap in your device is likely to wear out and become unusable. If you’re looking to replace a worn out or damaged hand strap, follow the steps in this guide.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove all eight screws using the Phillips #000 screwdriver. Remove all eight screws using the Phillips #000 screwdriver. Remove all eight screws using the Phillips #000 screwdriver.
    • Remove all eight screws using the Phillips #000 screwdriver.

  2. Pull apart the sides of the camera once the screws are removed.
    • Pull apart the sides of the camera once the screws are removed.

  3. Remove the three screws using the Phillips #000 screwdriver.
    • Remove the three screws using the Phillips #000 screwdriver.

  4. Remove the three screws using the Phillips #000 screwdriver.
    • Remove the three screws using the Phillips #000 screwdriver.

  5. Remove the four screws using a Phillips #000 screwdriver.
    • Remove the four screws using a Phillips #000 screwdriver.

  6. Remove the hand strap from the device. Remove the hand strap from the device.
    • Remove the hand strap from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 29