Repareer je spullen Gemeenschap Winkel

Samsung NX2000 Motherboard Replacement

Inleiding

This guide will require an extensive amount of tools, from screwdrivers to scalpels. The camera will be taken apart piece by piece extensively so make sure there is enough room to lay out all the parts without them becoming lost.

Wat je nodig hebt

  1. Samsung NX2000 Motherboard Replacement, Motherboard: stap 1, afbeelding 1 van 3 Samsung NX2000 Motherboard Replacement, Motherboard: stap 1, afbeelding 2 van 3 Samsung NX2000 Motherboard Replacement, Motherboard: stap 1, afbeelding 3 van 3

    • Remove the 4mm Y0 screws found on the sides and bottom of the camera.

    Vertaal

  2. Samsung NX2000 Motherboard Replacement: stap 2, afbeelding 1 van 3 Samsung NX2000 Motherboard Replacement: stap 2, afbeelding 2 van 3 Samsung NX2000 Motherboard Replacement: stap 2, afbeelding 3 van 3

    • Use a plastic opening tool to pry the back cover (with LCD screen) away from the front of the camera.

    • Use a plastic opening tool to disconnect the LCD ribbon cable holding the two pieces of the camera together.

    Vertaal

  4. Samsung NX2000 Motherboard Replacement: stap 3, afbeelding 1 van 1

    • Move towards the main frame of the camera and locate the three 1mm Y0 screws holding down the motherboard.

    Vertaal

  5. Samsung NX2000 Motherboard Replacement: stap 4, afbeelding 1 van 2 Samsung NX2000 Motherboard Replacement: stap 4, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Lift the duct tape covering the ribbon cable connectors.

    • Use a plastic opening tool to lift the black tab on top of the ZIF connectors.

    • Pull all five ribbon cables out with tweezers.

    Vertaal

  6. Samsung NX2000 Motherboard Replacement: stap 5, afbeelding 1 van 3 Samsung NX2000 Motherboard Replacement: stap 5, afbeelding 2 van 3 Samsung NX2000 Motherboard Replacement: stap 5, afbeelding 3 van 3

    • Take the time to make sure everything is detached and lift the motherboard slowly using your fingers.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 5 andere bijdragers

Delmis Gomez

Lid sinds: 02/09/16

125 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

Team

USF Tampa, Team 7-4, Cheng Spring 2016 Lid van USF Tampa, Team 7-4, Cheng Spring 2016

USFT-CHENG-S16S7G4

4 Leden

10 handleidingen geschreven

4 opmerkingen

The step for removing the metal hot shoe lit and removing 2 small screws is missing.

This is also required in order to be able to remove the back cover.

Rinaldo Eversdijk - Antwoord

The step removing the metal hot shoe lit and removing 2 small screws underneath is missing.

This is required in order to be able to remove the back cover.

Rinaldo Eversdijk - Antwoord

The camera is simply dead from one day to the next it stopped working, what could it be?

my_legacy_lethal_infected - Antwoord

Aqui a mesma coisa, do nada, quando liga a câmera o LED Verde fica parado e em seguida pisca alternadamente, ESTÁ NOVISSIMA, nunca sofreu quedas ou qualquer outro tipo de avaria

Gabriel Fernandes Guimaraes -

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 13

Altijd: 1,396