Samsung NP-130-JA01US RAM Replacement

Inleiding

This is a simple process to upgrade the RAM in the Samsung NP-130-JA01US.

Upgrading your RAM memory card will allow your unit to handle more programs at the same time, like having multiple tabs open, and reducing the time your unit needs to turn on.

RAM memory upgrade is a quick and cheap way to improve the performance of your unit.

Wat je nodig hebt

Stap 1 Battery

Samsung NP-130-JA01US RAM Replacement, Battery: stap 1, afbeelding 1 van 1

Turn off the computer.
Disconnect the charger cable from the computer.
Failure to disconnect the charger cable from the computer could result in an electric shock.
Flip the computer over so the underside is facing up.

Bewerken

Stap 2

Slide the left and right slider buttons fully away from each other.

Bewerken

Stap 3

Pull the battery out of the computer.

Bewerken

Stap 4 RAM

Samsung NP-130-JA01US RAM Replacement, RAM: stap 4, afbeelding 1 van 2

Samsung NP-130-JA01US RAM Replacement, RAM: stap 4, afbeelding 2 van 2

Locate the "Memory" panel on the bottom right corner.
Use the Phillips 01 screwdriver to remove the screw.
The screw is a Phillips 1 (PH 1) with a length of 60 millimeters (mm)

Bewerken

Stap 5

With your hand, lift panel and remove it.

Bewerken

Stap 6

Slide metal prongs (marked in red squares) away from each other with your fingers.
The RAM chip will automatically lift up at an angle for easy ejection.

Bewerken