Ga door naar hoofdinhoud

Samsung Jack Rear Case Replacement

Wat je nodig hebt

  1. Samsung Jack Rear Case Replacement, Battery: stap 1, afbeelding 1 van 1
    • Slide the battery cover downwards with pressure focused on the center of the cover.

    • Lift the cover off of the phone.

  2. Samsung Jack Rear Case Replacement: stap 2, afbeelding 1 van 1
    • Grasp the bottom left and right corners of the battery and lift it from its housing.

  3. Samsung Jack Rear Case Replacement, Rear Case: stap 3, afbeelding 1 van 1
    • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

  4. Samsung Jack Rear Case Replacement: stap 4, afbeelding 1 van 3 Samsung Jack Rear Case Replacement: stap 4, afbeelding 2 van 3 Samsung Jack Rear Case Replacement: stap 4, afbeelding 3 van 3
    • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

    • Insert the Plastic Opening Tool in between the front and rear cases.

    • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

  5. Samsung Jack Rear Case Replacement: stap 5, afbeelding 1 van 1
    • Lift the rear case off of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Paul Piller

Lid sinds: 04/12/11

56 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 24-57, Amido Spring 2011 Lid van Cal Poly, Team 24-57, Amido Spring 2011

CPSU-AMIDO-S11S24G57

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 1,136