Repareer je spullen Gemeenschap Winkel

Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement

Inleiding

A broken SIM card holder or memory card holder prevents your tablet from connecting to your network or storing memory, respectively. Before starting, eject the SIM card and memory card trays.

Wat je nodig hebt

  1. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: stap 1, afbeelding 1 van 2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: stap 1, afbeelding 2 van 2

    • Apply the heat gun around the edges of the tablet to melt the adhesive glue.

    • Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.

    • If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.

    Bewerken

  2. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 2, afbeelding 1 van 2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 2, afbeelding 2 van 2

    • Apply the suction to the bottom or top right corner.

    • Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.

    Bewerken

  3. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 3, afbeelding 1 van 1

    • Once the screen is detached, open the tablet like a book.

    • Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.

    Bewerken

  5. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 4, afbeelding 1 van 1

    • Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.

    Bewerken

  6. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 5, afbeelding 1 van 1

    • Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

    Bewerken

  7. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: stap 6, afbeelding 1 van 2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: stap 6, afbeelding 2 van 2

    • Using the Philips #000 screwdriver, remove the seventeen 2.74 mm screws around the edges.

    • Remove the two 2.74 mm black screws in the middle of the tablet with the Philips #000 screwdriver.

    • Put the screws on a magnetic project mat or in a container so that you do not lose them.

    Bewerken

  8. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 7, afbeelding 1 van 3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 7, afbeelding 2 van 3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: stap 7, afbeelding 3 van 3

    • Take the plastic opening tool around the tablet to remove the motherboard from the device.

    Bewerken

  9. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: stap 8, afbeelding 1 van 2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: stap 8, afbeelding 2 van 2

    • Locate the SIM card and the memory card holders along the right side of the tablet.

    • Using the precision tweezers, remove the SIM card and memory card holders.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Joy Harris

Lid sinds: 02/15/17

814 Reputatie

7 handleidingen geschreven

Medailles: 15

+12 andere badges

Team

USF Tampa, Team S3-G4, Sullivan Spring 2017 Lid van USF Tampa, Team S3-G4, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G4

3 Leden

14 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 6

Altijd: 690