Repareer je spullen Gemeenschap Winkel

Samsung Galaxy S6/S7 Edge Screw identification

Inleiding

Samsung has used the same screws in all mobile phone from the S3 - S5 models including the minis. The S6 series brought about new screws and if mixed up screws in too far and causes damage.

  1. Samsung Galaxy S6/S7 Edge Screw identification, Samsung Galaxy S6/S7 Edge Screw identification: stap 1, afbeelding 1 van 1

    • 3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.

    Bewerken

  3. Samsung Galaxy S6/S7 Edge Screw identification: stap 2, afbeelding 1 van 1

    • S3, S4, S5 screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.

    Bewerken

  4. Samsung Galaxy S6/S7 Edge Screw identification: stap 3, afbeelding 1 van 1

    • Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and S7 screen replacements.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

28 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Nick Kane

Lid sinds: 02/20/15

1.017 Reputatie

1 Handleiding geschreven

Medailles: 14

+11 andere badges

Team

smashedit.co.nz Lid van smashedit.co.nz

Business

9 Leden

3 handleidingen geschreven

Één opmerking

Some of the screws in my S6 seem to be even shorter than 3.2 mm . Is that right? And in which holes do those fit? I think I mixed them up...

jellemaris - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 16

Altijd: 9,436