Ga door naar hoofdinhoud
  1. Remove the single 3.0 mm Phillips #00 screw securing the motherboard to the midframe.
    • Remove the single 3.0 mm Phillips #00 screw securing the motherboard to the midframe.

  2. Pull, but do not remove, the motherboard away from the midframe to allow access to the connectors on the rear. Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector. Lay the motherboard on a clean flat surface and support the interior midframe with one hand, leaving the other hand free to work on the motherboard assembly.
    • Pull, but do not remove, the motherboard away from the midframe to allow access to the connectors on the rear.

    • Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.

    • Lay the motherboard on a clean flat surface and support the interior midframe with one hand, leaving the other hand free to work on the motherboard assembly.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Lid sinds: 18-10-12

448.367 Reputatie

547 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

146 Leden

17.094 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 104