Inleiding

Replace the midframe of your Samsung Galaxy S Vibrant or remove the midframe to access the phone's internal components.

Onderdelen

Geen onderdelen nodig.

Locate the small slit on the bottom edge of the device between the back and front cases. Pop the back case off by inserting your finger and pulling the case away from the phone. If necessary (it shouldn't be), use the  Plastic Opening Tools to pry the back case off.
  • Locate the small slit on the bottom edge of the device between the back and front cases.

  • Pop the back case off by inserting your finger and pulling the case away from the phone.

Voeg opmerking toe

Remove the battery by pushing the bottom edge of the battery up and away from the phone If you would prefer, you may use the  Plastic Opening Tools for this step as well.
  • Remove the battery by pushing the bottom edge of the battery up and away from the phone

Voeg opmerking toe

Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.
  • Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.

Voeg opmerking toe

Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.
  • Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.

Voeg opmerking toe

Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe. Work carefully, and disengage all of the clips before removing the midframe. The power button and the volume control button on the sides of the phone will fall out when the midframe is removed.
  • Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe.

    • Work carefully, and disengage all of the clips before removing the midframe.

  • The power button and the volume control button on the sides of the phone will fall out when the midframe is removed.

Voeg opmerking toe

Slide the SD card out of its slot. Slide the SD card out of its slot.
  • Slide the SD card out of its slot.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Krista Purser

Lid sinds: 17-01-13

212 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 18-37, Regan Winter 2013 Lid van Cal Poly, Team 18-37, Regan Winter 2013

CPSU-REGAN-W13S18G37

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 1,402