Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Replacing the motherboard of your Samsung Galaxy Note Pro 12.2 (Galaxy SM-P900) device can provide faster RAM, faster data transfer, for increased performance.

The motherboard is responsible for power and communication between all of your hardware components delicately connected to it on your tablet device. This is why many hardware components need to be removed from the device before removing the motherboard. Steps 1-5 will walk you through the removal of those components.

Lastly, be sure that your device is powered off before beginning the disassembly process.

  1. Remove the back cover with the blue plastic opening tool.
    • Remove the back cover with the blue plastic opening tool.

  2. Disconnect the five base connectors from the motherboard by using the blue opening tool to carefully remove the connectors. Disconnect the five base connectors from the motherboard by using the blue opening tool to carefully remove the connectors.
    • Disconnect the five base connectors from the motherboard by using the blue opening tool to carefully remove the connectors.

  3. OPEN ALLE TABBLADEN

    RAM-upgradekits voor Mac

    Koop kits

    Genoeg RAM
    voor al je tabbladen

    Koop kits
  4. Remove the yellow tape on the ribbon cables before attempting to disconnect them from the motherboard. Using the blue opening tool, pry on the black tab at the base connector of ribbon cables until it is flipped up and moves with ease. Then, pull the ribbon cable from the base connectors of the motherboard.
    • Remove the yellow tape on the ribbon cables before attempting to disconnect them from the motherboard.

    • Using the blue opening tool, pry on the black tab at the base connector of ribbon cables until it is flipped up and moves with ease. Then, pull the ribbon cable from the base connectors of the motherboard.

  5. Potential damage to the motherboard could occur without supporting the black motherboard connector as the white cable connector is being removed. Remove the power cable from the motherboard by prying slightly on both sides of the clip using tweezers.
    • Potential damage to the motherboard could occur without supporting the black motherboard connector as the white cable connector is being removed.

    • Remove the power cable from the motherboard by prying slightly on both sides of the clip using tweezers.

  6. Remove all three of the 3.0 mm screws  using the  Phillips #00 screwdriver. It is easiest to pry on the points depicted in the pictures for the next step. Use the blue plastic opening tool to pry  the speakers up from the clips that hold them in place.
    • Remove all three of the 3.0 mm screws using the Phillips #00 screwdriver.

    • It is easiest to pry on the points depicted in the pictures for the next step.

    • Use the blue plastic opening tool to pry the speakers up from the clips that hold them in place.

  7. Remove the motherboard using the blue opening tool while keeping any wires and connectors out of the way.
    • Remove the motherboard using the blue opening tool while keeping any wires and connectors out of the way.

    • The motherboard should come out freely.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

La'Taja Long

Lid sinds: 04-11-19

334 Reputatie

3 handleidingen geschreven

Team

IUPUI, Team S1-G3, Henning Fall 2019 Lid van IUPUI, Team S1-G3, Henning Fall 2019

IUPUI-HENNING-F19S1G3

3 Leden

3 handleidingen geschreven

Één commentaar

Hi. Can i install sm-p905 motherboard into my sm-p900?

yem44 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 18

Afgelopen 30 dagen: 76

Altijd: 502