Ga door naar hoofdinhoud

Deze versie kan foutieve bewerkingen bevatten. Schakel over naar de recentste gecontroleerde momentopname.

Wat je nodig hebt

  1. Deze stap is niet vertaald. Help het te vertalen

    : stap 1, afbeelding 1 van 1
    • Remove the Samsung S-Pen stylus.

    • Remove the micro SD storage card.

  2. Deze stap is niet vertaald. Help het te vertalen

    : stap 2, afbeelding 1 van 1
    • Using the plastic opening tool, start where the S-pen was located and carefully pry up the corner.

  3. Deze stap is niet vertaald. Help het te vertalen

    : stap 3, afbeelding 1 van 1
    • Work your way around the entire device by carefully prying and sliding the plastic opening tool.

    • There are clips approximately 2cm apart. As you are removing the back cover you should hear the clips being dislocated from the tablet.

Eindstreep

16 andere personen hebben deze handleiding voltooid.

Joel

Lid sinds: 09/23/14

1.862 Reputatie

6 handleidingen geschreven

Team

USF Tampa, Team 12-2, Blackwell Fall 2014 Lid van USF Tampa, Team 12-2, Blackwell Fall 2014

USFT-BLACKWELL-F14S12G2

4 Leden

16 handleidingen geschreven

5 opmerkingen

news flash that phone in the picture is NOT a note 8

Nic Wilson - Antwoord

As stated in the title, this is regarding Galaxy Note 8.0 ( 2013 ), not for Note 8 Phone.

deadyoda -

Thanks for the guide, helped me to add a QI module into my Galaxy Note 8.0

deadyoda -

Thanks for sharing this useful guide! Also, if issue is related with software, we can use unbrick guide to get it repair.

Cheers!

Deepak Gupta - Antwoord

Thanks for sharing this info for the basic understanding. I always wanted to do this but afraid of the consequences.

Even I sell mobile covers in my shop from Mobile Back Covers.

Really helpful for me to explain my customers.

Invite Celebrate - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 19

Altijd: 34,082