Ga door naar hoofdinhoud

Inleiding

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.

Onderdelen

Geen onderdelen opgegeven.

    • Remove the back battery cover.

  1. Remove the phone's battery.
    • Remove the phone's battery.

  2. Remove six (4.28 x 1.25)mm screws.
    • Remove six (4.28 x 1.25)mm screws.

  3. Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

  4. Peel off the Identification sticker.
    • Peel off the Identification sticker.

  5. Peel the button sensor on the side of the motherboard off of the case.
    • Peel the button sensor on the side of the motherboard off of the case.

  6. Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
    • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

  7. Peel up the camera attachment.
    • Peel up the camera attachment.

  8. You will now be able to replace the Camera component with a new part.
    • You will now be able to replace the Camera component with a new part.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Michelle Haddock

Lid sinds: 20-04-11

38 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 15-11, Regan Spring 2011 Lid van Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,646