Inleiding

How to remove the motherboard of a Samsung Captivate Glide.

  1. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.
    • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

  2. Remove battery with plastic opening tool or finger. Remove battery with plastic opening tool or finger.
    • Remove battery with plastic opening tool or finger.

  3. Remove the seven screws from backplate using the #00 screwdriver. Remove the seven screws from backplate using the #00 screwdriver.
    • Remove the seven screws from backplate using the #00 screwdriver.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Remove the back plate using the plastic opening tool. There is a lip on each side, and both must be pried up. You can work your way around the edges after prying the two sides.
    • Remove the back plate using the plastic opening tool.

    • There is a lip on each side, and both must be pried up.

    • You can work your way around the edges after prying the two sides.

  6. Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone. Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.
    • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

  7. Disconnect the antenna cable from the motherboard using tweezers.
    • Disconnect the antenna cable from the motherboard using tweezers.

  8. Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.
    • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

  9. Lift the motherboard out of the base of the phone. Lift the motherboard out of the base of the phone.
    • Lift the motherboard out of the base of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nicholas Mira

Lid sinds: 23-09-14

280 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 5-3, Mcgee Fall 2014 Lid van USF Tampa, Team 5-3, Mcgee Fall 2014

USFT-MCGEE-F14S5G3

4 Leden

5 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 543