Ga door naar hoofdinhoud

Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement

Wat je nodig hebt

  1. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement, Battery: stap 1, afbeelding 1 van 2 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement, Battery: stap 1, afbeelding 2 van 2
    • Remove all external power and turn off the tablet.

    • Insert a plastic opening tool between the screen and rear casing.

    • Pry the screen and rear casing apart.

  2. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 2, afbeelding 1 van 3 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 2, afbeelding 2 van 3 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 2, afbeelding 3 van 3
    • Remove the three green pieces of tape covering the white, black, and gold ribbon cables.

    • Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.

    • Pull the ribbon cables out of the sockets.

  3. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 3, afbeelding 1 van 3 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 3, afbeelding 2 van 3 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 3, afbeelding 3 van 3
    • Remove the ten 4mm Phillips #000 screws from the battery.

    • Use a plastic opening tool to pry up the battery.

    • Remove the battery.

  4. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement, Home Button: stap 4, afbeelding 1 van 2 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement, Home Button: stap 4, afbeelding 2 van 2
    • Remove the green protective tape from the three ZIF connectors on the motherboard.

    • Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.

    • Pull the ribbon cables out of their sockets.

  5. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 5, afbeelding 1 van 2 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 5, afbeelding 2 van 2
    • Remove the six 4mm Phillips #000 screws from the motherboard.

    • Remove the motherboard.

  6. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 6, afbeelding 1 van 2 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 6, afbeelding 2 van 2
    • Insert a plastic opening tool between the screen and bezel.

    • Slide the plastic opening tool around the perimeter while applying a prying motion.

    • Remove the screen from the display.

    • Applying heat may be needed to loosed the glue.

  7. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 7, afbeelding 1 van 2 Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 7, afbeelding 2 van 2
    • Locate the Home button on the front of the panel and carefully lift the gold ribbon surrounding it from RIGHT to LEFT.

  8. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 8, afbeelding 1 van 1
    • Using your Phillips #000 screwdriver Remove the two 4mm Phillips #000 screws from the home button.

  9. Samsubg Galaxy Tab A 10.1 S-Pen Home Button Replacement: stap 9, afbeelding 1 van 1
    • Remove the home button by sliding it to the left or right while pulling up.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Guneet Bawa

Lid sinds: 04/12/18

670 Reputatie

4 handleidingen geschreven

Team

UW Tacoma, Team S1-G5, Liner Spring 2018 Lid van UW Tacoma, Team S1-G5, Liner Spring 2018

UWT-LINER-S18S1G5

5 Leden

8 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 16

Altijd: 1,949