Ga door naar hoofdinhoud

Ryobi P271 Reverse Switch Replacement

Wat je nodig hebt

  1. Ryobi P271 Reverse Switch Replacement, Battery: stap 1, afbeelding 1 van 3 Ryobi P271 Reverse Switch Replacement, Battery: stap 1, afbeelding 2 van 3 Ryobi P271 Reverse Switch Replacement, Battery: stap 1, afbeelding 3 van 3
    • Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

  2. Ryobi P271 Reverse Switch Replacement, Reverse Switch: stap 2, afbeelding 1 van 1
    • Remove all ten Torx screws from the drill's case.

  3. Ryobi P271 Reverse Switch Replacement: stap 3, afbeelding 1 van 1
    • Gently pull the casing apart.

    • Separating the casing too quickly could cause internals to become loose, and not easily seat together upon reassembly.

  4. Ryobi P271 Reverse Switch Replacement: stap 4, afbeelding 1 van 1
    • Remove the trigger so that it can fully expose the reverse switch.

  5. Ryobi P271 Reverse Switch Replacement: stap 5, afbeelding 1 van 1
    • Firmly grab the reverse switch and pull on it until it comes out of its socket.

Conclusie

To reassemble your device, follow these instructions in reverse order.

nathan krehbiel

Lid sinds: 11/05/19

229 Reputatie

2 handleidingen geschreven

Team

UMass Dartmouth, Team S2-G6, Barthe Fall 2019 Lid van UMass Dartmouth, Team S2-G6, Barthe Fall 2019

UMASSD-BARTHE-F19S2G6

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 20

Altijd: 1,238