Repareer je spullen Gemeenschap Winkel

Rosewill NEON M62 Bottom Panel Replacement

Inleiding

This guide explains how to completely teardown the Rosewill NEON M62 mouse. This repair should be performed when something needs to be replaced internally.

Wat je nodig hebt

  1. Rosewill NEON M62 Bottom Panel Replacement, Bottom Panel: stap 1, afbeelding 1 van 1

    • Place the mouse so the bottom is facing upwards.

    • Remove the plastic skates.

    • These are not shown in the picture since they were missing from the device.

    • Remove the two 5 mm screws with a Phillips #00 screwdriver.

    Bewerken

  3. Rosewill NEON M62 Bottom Panel Replacement: stap 2, afbeelding 1 van 1

    • Use the opening tool along the side of the mouse to open up it.

    • This may take multiple attempts to do so; be patient and careful not to break the mouse.

    Bewerken

  4. Rosewill NEON M62 Bottom Panel Replacement: stap 3, afbeelding 1 van 2 Rosewill NEON M62 Bottom Panel Replacement: stap 3, afbeelding 2 van 2

    • Loosen the top and bottom half of the mouse with the opening tool, and slowly pull up the bottom half of the mouse.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Joshua Alves

Lid sinds: 03/16/23

97 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

Team

UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023 Lid van UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023

UMASSD-RYCKEBUSCH-S23S7G2

3 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 103