Rocketfish RF-WSP313 Speaker Replacement - iFixit reparatiehandleiding

Inleiding

This guide will show you how to remove the components of the product necessary to access the bluetooth speaker, remove it, and replace it with a new one.

Wat je nodig hebt

Stap 1 Speaker

Rocketfish RF-WSP313 Speaker Replacement, Speaker: stap 1, afbeelding 1 van 1

Using the metal spudger, remove the outer cap from the top of the device.

Stap 2

Rocketfish RF-WSP313 Speaker Replacement: stap 2, afbeelding 1 van 1

Using a Phillips # 1 screwdriver, remove the four 1.1 cm flathead screws attaching the metal ring to the top of the device.

Stap 3

Rocketfish RF-WSP313 Speaker Replacement: stap 3, afbeelding 1 van 1

Remove the ring and set aside.

Stap 4

Rocketfish RF-WSP313 Speaker Replacement: stap 4, afbeelding 1 van 1

Using the metal spudger, remove the cap from the bottom of the device.

Stap 5

Rocketfish RF-WSP313 Speaker Replacement: stap 5, afbeelding 1 van 1

Using a Phillips # 1 screwdriver, remove the four 1.1 sm screws attaching the metal ring to the bottom of the device.

Stap 6

Rocketfish RF-WSP313 Speaker Replacement: stap 6, afbeelding 1 van 1

Remove the ring and set aside.

Stap 7

Rocketfish RF-WSP313 Speaker Replacement: stap 7, afbeelding 1 van 1

Using a Phillips # 1 screwdriver, remove the four 1 cm screws from the outside panel. You will do this for each panel; it does not matter which side you start with.

Stap 8

Rocketfish RF-WSP313 Speaker Replacement: stap 8, afbeelding 1 van 1

Using the metal spudger, pry off the side panel. Repeat this step on the other side panel.

Stap 9

Rocketfish RF-WSP313 Speaker Replacement: stap 9, afbeelding 1 van 1

Using a Phillips #1 screwdriver, remove the four 1.1 cm flathead screws from the side of the device. Repeat this step on the other side of the device.

Stap 10

Rocketfish RF-WSP313 Speaker Replacement: stap 10, afbeelding 1 van 2

Rocketfish RF-WSP313 Speaker Replacement: stap 10, afbeelding 2 van 2

Using the metal spudger, open the device.

Stap 11

Rocketfish RF-WSP313 Speaker Replacement: stap 11, afbeelding 1 van 2

Rocketfish RF-WSP313 Speaker Replacement: stap 11, afbeelding 2 van 2

Using your fingers (or a pair of tweezers), disconnect the speaker cord from its socket.

Stap 12

Rocketfish RF-WSP313 Speaker Replacement: stap 12, afbeelding 1 van 1

Using a Phillips #1 screwdriver, remove the four 1.2 cm pan head screws surrounding the speaker.

Stap 13

Rocketfish RF-WSP313 Speaker Replacement: stap 13, afbeelding 1 van 1

Remove the speaker from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Kara Falknor

Lid sinds: 01/25/17

101 Reputatie

1 Handleiding geschreven

Team

Washington State, Team 1-50, Staggers Spring 2017 Lid van Washington State, Team 1-50, Staggers Spring 2017

WSU-STAGGERS-S17S1G50

2 Leden

1 handleiding geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 552