Repareer je spullen Gemeenschap Winkel

Ring Spotlight Cam Battery Lights Replacement

Inleiding

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

Wat je nodig hebt

  1. Ring Spotlight Cam Battery Lights Replacement, Lights: stap 1, afbeelding 1 van 1

    • Remove the top plastic pad by peeling it off with a metal spudger.

    Bewerken

  3. Ring Spotlight Cam Battery Lights Replacement: stap 2, afbeelding 1 van 2 Ring Spotlight Cam Battery Lights Replacement: stap 2, afbeelding 2 van 2

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

    Bewerken

  4. Ring Spotlight Cam Battery Lights Replacement: stap 3, afbeelding 1 van 1

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

2 opmerkingen

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell - Antwoord

This is not a complete how to. The directions stop in the middle and don't show the replacement of the LEDs. Also no parts link for the replacement LED strips

Matt Newman - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 24

Afgelopen 30 dagen: 91

Altijd: 4,848