Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement

Inleiding

The Motor Housing with Handle Assembly on a circular saw is one of the only pastic items on the saw which inside the saw. If Motor Housing or Handle Assembly breaks or gets damaged this guide will help replace them. Replacing the Motor Housing with Handle Assembly is very moderatly easy and doesn’t require any methods that are complicated.

Wat je nodig hebt

Stap 1 Motor Housing with Handle Assembly

Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement, Motor Housing with Handle Assembly: stap 1, afbeelding 1 van 3

Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement, Motor Housing with Handle Assembly: stap 1, afbeelding 2 van 3

Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement, Motor Housing with Handle Assembly: stap 1, afbeelding 3 van 3

Remove the brush assembly with a flat head screwdriver.

Bewerken

Stap 2

Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement: stap 2, afbeelding 3 van 3

Use a T25 Torx screwdriver to remove 3 (M5 x 58 mm) screws.

Bewerken

Stap 3

Ridgid Circular Saw R3205 Motor Housing with Handle Assembly Replacement: stap 3, afbeelding 3 van 3

Use a T20 Torx screwdriver to remove the (1/4-20 x 0.66 in.) screw.
After removing the (1/4-20 x 0.66 in.) screw the lever assembly can be unscrewed from the (1/4-20 x 0.66 in.) screw.

Bewerken