Ga door naar hoofdinhoud

Inleiding

If your controller(s) have button malfunctions, they can be replaced.

Onderdelen

Geen onderdelen opgegeven.

  1. With the controller on its face, remove the five 6 mm Phillips #1 screws. After screw removal, carefully lift the controller casing. After screw removal, carefully lift the controller casing.
    • With the controller on its face, remove the five 6 mm Phillips #1 screws.

    • After screw removal, carefully lift the controller casing.

  2. Pinch the top and bottom of the shoulder pads, then lift out. There are small elastic pads below each shoulder pad.  Replace these if they are not functioning correctly. There are small elastic pads below each shoulder pad.  Replace these if they are not functioning correctly.
    • Pinch the top and bottom of the shoulder pads, then lift out.

    • There are small elastic pads below each shoulder pad. Replace these if they are not functioning correctly.

  3. Koop geen nieuw model.

    Bespaar $10 op $50 met coupon
    SKIPANDSAVE10

    Bespaar nu

    Koop geen nieuw model.

    Take $10 off $50 with
    SKIPANDSAVE10

    Bespaar nu
  4. Carefully lift the circuit board from the controller case. Carefully lift the circuit board from the controller case. Carefully lift the circuit board from the controller case.
    • Carefully lift the circuit board from the controller case.

  5. To replace the action button pad, lift this part out. Lift the Select and Start button pad. If replacing the D-Pad, lift this pad.
    • To replace the action button pad, lift this part out.

    • Lift the Select and Start button pad.

    • If replacing the D-Pad, lift this pad.

    • Pinch and lift the shoulder button pads.

  6. Support the controller face and push buttons toward the inner case. Use care.  The buttons have a tiny tab to keep them in place. Support the controller face and push the D-Pad toward the inner case.
    • Support the controller face and push buttons toward the inner case.

    • Use care. The buttons have a tiny tab to keep them in place.

    • Support the controller face and push the D-Pad toward the inner case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evelyn

Lid sinds: 25-09-17

223 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team S4-G4, Eyestone Fall 2017 Lid van USF Tampa, Team S4-G4, Eyestone Fall 2017

USFT-EYESTONE-F17S4G4

3 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 12

Altijd: 293