Inleiding

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

  1. Remove the five case screws with a Phillips #00 Screwdriver. Five 3.5mm Phillips Screws Five 3.5mm Phillips Screws
    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

  2. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  3. Gently lift up the back cover and set aside.
    • Gently lift up the back cover and set aside.

  4. Use small plastic pry tool to gently remove rear button plate.
    • Use small plastic pry tool to gently remove rear button plate.

    • A heat gun may be used to soften the glue for easier removal.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Anthony Giardina

Lid sinds: 19-04-10

20 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 7-10, Maness Spring 2010 Lid van Cal Poly, Team 7-10, Maness Spring 2010

CPSU-MANESS-S10S7G10

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,329