Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Repairing the Stitching on your Patagonia Nano Puff ® Jacket

Wat je nodig hebt

  1. Repairing the Stitching on your Patagonia Nano Puff ® Jacket, Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 1, afbeelding 1 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket, Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 1, afbeelding 2 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket, Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 1, afbeelding 3 van 3
  2. Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 2, afbeelding 1 van 2 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 2, afbeelding 2 van 2
    • Set your sewing machine stitch length to about 3.

    • Clip the extra thread off of your jacket.

  3. Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 3, afbeelding 1 van 2 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 3, afbeelding 2 van 2
    • Align the jacket in the sewing machine at a distance of roughly five stitches before the missing stitching.

    • Be sure that the jacket is unzipped and that you only have one layer of the jacket, including the lining, in the sewing machine. Sewing two layers together will sew the jacket shut.

  4. Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 4, afbeelding 1 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 4, afbeelding 2 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 4, afbeelding 3 van 3
    • Sink the needle, being sure that it aligns with the stitching.

    • Sew forward a few stitches and then backstitch to hold your stitches in place.

    • Sew along the holes where the stitching used to be.

  5. Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 5, afbeelding 1 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 5, afbeelding 2 van 3 Repairing the Stitching on your Patagonia Nano Puff ® Jacket: stap 5, afbeelding 3 van 3
    • Continue sewing until you overlap five of the remaining stitches.

    • Backstitch to hold your stitches in place.

    • Clip any threads to free the garment from the sewing machine.

Eindstreep

4 andere personen hebben deze handleiding voltooid.

Brittany McCrigler

Lid sinds: 03/05/12

88.898 Reputatie

131 handleidingen geschreven

Team

iFixit Lid van iFixit

Staff

136 Leden

16.560 handleidingen geschreven

2 opmerkingen

Do you think you could demonstrate adding an elastic cuff to the nano-puff? I have one but the sleeves are just a hair too short.

Luke Cardoni - Antwoord

I got a new jacket recently and soon discovered loose stitching on the sleeve underarm.

On my precious jacket I didn’t want to use a sewing machine -sewing the two layers together- so I used a needle and the loose thread to secure the loose threads to the fabric.

This time I tried my grandmothers #12 crochet needle to crochet (knot) the threads to the secure stitches and pull the ends under.

Sue clark - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 6

Afgelopen 7 dagen: 35

Afgelopen 30 dagen: 179

Altijd: 18,946