Inleiding

Component teardown of Gateway 420GR desktop. This machine originally shipped with Windows XP.

Deze demontage is geen reparatiehandleiding. Om je Gateway 420GR te repareren, gebruik onze reparatiehandleidingen.

  1. The left panel of the case has thumbscrews that release the left side from the case.
    • The left panel of the case has thumbscrews that release the left side from the case.

  2. Loosen the first thumbscrew
    • Loosen the first thumbscrew

  3. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel

    Ooit iets gerepareerd? Je bent een genie.

    Deel je reparatie met #ImAGenius

    We zijn allemaal genieën

    Deel je reparatie met #ImAGenius

  4. Loosen the second thumbscrew.
    • Loosen the second thumbscrew.

  5. The side panel will now slide toward the back of the case.
    • The side panel will now slide toward the back of the case.

  6. System RAM
    • System RAM

    • USB headers for front panel USB ports.

    • CMOS battery

  7. Pair one RAM retention clips.  There are two (one on each end) for each of the available slots.
    • Pair one RAM retention clips. There are two (one on each end) for each of the available slots.

    • Pair two RAM retention clips. There are two (one on each end) for each of the available slots.

    • RAM should be paired (same size) and the machine support up to 4GB or RAM as 1GB modules in each of the 4 slots.

    • System supported RAM is 184-pin DIMM DDR PC3200

kyle23

Lid sinds: 22-04-10

182 Reputatie

1 Handleiding geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 11

Altijd: 2,507