Inleiding

Camera went completely dead - removed the front cover and found a screw loose. Replaced it and the camera worked fine. This could be a problem for others.

Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”
  • Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”

Voeg opmerking toe

Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and  firmly tighten it. Reposition and tighten the covers.  Problem solved!
  • Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and firmly tighten it. Reposition and tighten the covers. Problem solved!

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Frank

Lid sinds: 13-04-11

25 Reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 673