Repairing Canon PowerShot Lens Error E-18

Inleiding

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

Wat je nodig hebt

Stap 1 Repairing Canon PowerShot Lens Error E-18

Repairing Canon PowerShot Lens Error E-18, Repairing Canon PowerShot Lens Error E-18: stap 1, afbeelding 1 van 1

Place camera lens facing upwards on the table.
Press and hold down the power button.
Simultaneously press down the shutter button.

Bewerken

Stap 2

Replace the batteries in the camera.
To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.
Remove the old batteries from the camera and wait a few moments.
Put in a fresh set of batteries.
Close battery slide and power camera back on.

Bewerken

Stap 3

Put blow dryer in the "no heat" setting prior to plugging it in.
Plug in and turn the blow dryer on.
Blow air in the gaps between the lens.

Bewerken

Conclusie

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.