Ga door naar hoofdinhoud

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

Wat je nodig hebt

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5  opening procedure: stap 1, afbeelding 1 van 1
    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 2, afbeelding 1 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 2, afbeelding 2 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 2, afbeelding 3 van 3
    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 3, afbeelding 1 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 3, afbeelding 2 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 3, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Koop
    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 4, afbeelding 1 van 1
    • Also remove the two oval head screws underneath the ground coffee compartment lid.

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 5, afbeelding 1 van 1
    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

  6. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 6, afbeelding 1 van 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 6, afbeelding 2 van 2
    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 7, afbeelding 1 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 7, afbeelding 2 van 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 7, afbeelding 3 van 3
    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 8, afbeelding 1 van 1
    • Remove the Torx T15 screw on the side panel with the water tank.

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 9, afbeelding 1 van 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 9, afbeelding 2 van 2
    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 10, afbeelding 1 van 1
    • Pull the left side panel slightly towards the back and remove it.

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 11, afbeelding 1 van 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 11, afbeelding 2 van 2
    • The brewing unit is on the left side of the machine.

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 12, afbeelding 1 van 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 12, afbeelding 2 van 2
    • The cover over the brewing unit is only lightly gripped. Lift it out.

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 13, afbeelding 1 van 1
    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 14, afbeelding 1 van 1
    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): stap 15, afbeelding 1 van 1
    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

Conclusie

Work your way through the instructions in reverse to re-assemble the device.

Één andere persoon heeft deze handleiding voltooid.

Met dank aan deze vertalers:

de en

100%

Deze vertalers helpen ons de wereld te repareren! Wil je bijdragen?
Begin met vertalen ›

VauWeh

Lid sinds: 10/19/15

199.756 Reputatie

246 handleidingen geschreven

Team

Repair is War on Entropy Lid van Repair is War on Entropy

Community

24 Leden

1.085 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 25

Afgelopen 30 dagen: 58

Altijd: 4,610