Skip to main content

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the five 13.0 mm Torx #10 screws found on top of the frame. Remove the four 9.0 mm Torx #10 smaller screws.
    • Remove the five 13.0 mm Torx #10 screws found on top of the frame.

    • Remove the four 9.0 mm Torx #10 smaller screws.

  2. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  3. Lift the rail carefully as a strip and motor will be connected to the bottom part of the printer. Now detach the white strip and wires by gently lifting them up.
    • Lift the rail carefully as a strip and motor will be connected to the bottom part of the printer.

    • Now detach the white strip and wires by gently lifting them up.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Justin Taiki Fukada

Lid sinds: 25-01-14

822 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 1-41, Maness Winter 2014 Lid van Cal Poly, Team 1-41, Maness Winter 2014

CPSU-MANESS-W14S1G41

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 29