Inleiding

This guide will explain how to remove the display hinge. The tools required for this section are the spudger and the PH 2 screwdriver.

Onderdelen

Geen onderdelen nodig.

Before starting, make sure the display is UNPLUGGED.  Failure to do so can result in shock and serious injury.
  • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

  • Flip the Cinema Display so it is on its face and the feet are pointed away from you.

  • Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).

  • Remove the back foot from the hinge mount by gently pulling it upwards.

Voeg opmerking toe

Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.
  • Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.

  • Lift the back plate off of the display.

  • Completely remove the back plate and set it aside.

Voeg opmerking toe

  • Remove the Apple Display Connector plate screws (9.52 x 3.43 mm) with the PH 2 screwdriver.

  • Once the two screws have been removed, move the cord out of the way.

Voeg opmerking toe

  • Remove the hinge plate screws (5.52 x 3.43 mm) with the PH 2 screw driver.

  • Then lift out the hinge mount.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Thomas Harper

Lid sinds: 01-04-11

219 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 10-41, Forte Spring 2011 Lid van Cal Poly, Team 10-41, Forte Spring 2011

CPSU-FORTE-S11S10G41

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 21

Altijd: 5,868