Onderdelen

Geen onderdelen nodig.

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    Voeg opmerking toe

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    Voeg opmerking toe

    • Unscrew the 3 screws in the back.

    Voeg opmerking toe

    • Pull the outer case upward and then towards you.

    Voeg opmerking toe

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    Voeg opmerking toe

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    Voeg opmerking toe

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    Voeg opmerking toe

    • Remove the three screws holding in the DVD tray

    Voeg opmerking toe

    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

    Voeg opmerking toe

    • Gently lift the DVD tray off of the motherboard.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evan Domingue

Lid sinds: 28-01-11

398 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 3-30, Regan Winter 2011 Lid van Cal Poly, Team 3-30, Regan Winter 2011

CPSU-REGAN-W11S3G30

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 5

Altijd: 1,589