Repareer je spullen Gemeenschap Winkel

Nishiki Aero II Tire Removal

Inleiding

This guide will walk you through how to quickly and efficiently remove the tire from your Nishiki Aero II bicycle in five simple steps! This guide may be used to help you remove damaged or flat tires for replacement! Before you begin, there is no special skills needed for this removal. All you need is to familiarize yourself with the tools listed and get started!

Wat je nodig hebt

  1. Nishiki Aero II Tire Removal, Removing Road Bike Front Wheel: stap 1, afbeelding 1 van 1

    • Turn the bike upside down.

    Vertaal

  2. Nishiki Aero II Tire Removal: stap 2, afbeelding 1 van 1

    • Use a wrench to loosen the nut holding the wheel's axle on one side.

    • Once it's loose enough, continue removing the nut with your hand.

    Vertaal

  3. Nishiki Aero II Tire Removal: stap 3, afbeelding 1 van 2 Nishiki Aero II Tire Removal: stap 3, afbeelding 2 van 2

    • After removing the nut, also remove the washer under it.

    • Keep note of how the washer has a small appendage that locks into a slot in the fork.

    Vertaal

  4. Nishiki Aero II Tire Removal: stap 4, afbeelding 1 van 1

    • Follow the previous steps for the opposite side.

    Vertaal

  5. Nishiki Aero II Tire Removal: stap 5, afbeelding 1 van 1

    • Lift the wheel up from the fork.

    Vertaal

  6. Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: stap 6, afbeelding 1 van 2 Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: stap 6, afbeelding 2 van 2

    • Unscrew the cap from the air valve.

    • Release the tire's air by pressing a thin object on the center pin of the valve.

    • A hex wrench or any blunt object can be used.

    Vertaal

  7. Nishiki Aero II Tire Removal: stap 7, afbeelding 1 van 3 Nishiki Aero II Tire Removal: stap 7, afbeelding 2 van 3 Nishiki Aero II Tire Removal: stap 7, afbeelding 3 van 3

    • Wedge a tire lever between the tire and the rim. Grab the tire with the lever's inward scoop.

    • Grab the tire's edge with the lever and pull it back to scoop the tire from the rim.

    • Keep the tire lever anchored on a spoke with the notch on the lever's opposite end.

    Vertaal

  8. Nishiki Aero II Tire Removal: stap 8, afbeelding 1 van 2 Nishiki Aero II Tire Removal: stap 8, afbeelding 2 van 2

    • Repeat with an additional tire lever five inches away from the other.

    Vertaal

  9. Nishiki Aero II Tire Removal: stap 9, afbeelding 1 van 3 Nishiki Aero II Tire Removal: stap 9, afbeelding 2 van 3 Nishiki Aero II Tire Removal: stap 9, afbeelding 3 van 3

    • Repeat with a third tire lever farther around the tire.

    • Alternate lifting the second and third levers until the tire comes partway off.

    Vertaal

  10. Nishiki Aero II Tire Removal: stap 10, afbeelding 1 van 3 Nishiki Aero II Tire Removal: stap 10, afbeelding 2 van 3 Nishiki Aero II Tire Removal: stap 10, afbeelding 3 van 3

    • Wedge the tire off of the other rim with the tire levers.

    • Pull the air valve from its hole in the rim to completely remove the tire.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 8 andere bijdragers

Tobias Elder

Lid sinds: 04/25/13

113 Reputatie

7 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

Cal Poly, Team 21-53, Johann Spring 2013 Lid van Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 1,213