Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Removing Front Panel/ Screen Logic Board

Wat je nodig hebt

  1. Removing Front Panel/ Screen Logic Board, Front panel/ Screen Logic Board: stap 1, afbeelding 1 van 1
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Removing Front Panel/ Screen Logic Board: stap 2, afbeelding 1 van 1
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. Removing Front Panel/ Screen Logic Board: stap 3, afbeelding 1 van 1
    • Remove silver plate from phone.

  4. Removing Front Panel/ Screen Logic Board: stap 4, afbeelding 1 van 1
    • Using the spudger remove the plastic camera casing

  5. Removing Front Panel/ Screen Logic Board: stap 5, afbeelding 1 van 1
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  6. Removing Front Panel/ Screen Logic Board: stap 6, afbeelding 1 van 1
    • Use Spudger or hands to detach flex cable from front screen logic board

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cecilia

Lid sinds: 04/11/10

1 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 27-96, Amido Spring 2010 Lid van Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Leden

15 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 1,868