Inleiding

Need to get inside the amp? Remove the back panel!

  1. Be sure to unplug the device before proceeding.
    • Be sure to unplug the device before proceeding.

    • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

  2. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel

    Ooit iets gerepareerd? Je bent een genie.

    Deel je reparatie met #ImAGenius

    We zijn allemaal genieën

    Deel je reparatie met #ImAGenius

  3. Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.
    • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

  4. Once the top is separated, use your hand to remove the back panel from the unit.
    • Once the top is separated, use your hand to remove the back panel from the unit.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Greg Sawers

Lid sinds: 27-09-12

79 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 24-30, Regan Fall 2012 Lid van Cal Poly, Team 24-30, Regan Fall 2012

CPSU-REGAN-F12S24G30

5 Leden

7 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 44

Altijd: 4,113