Ga door naar hoofdinhoud

Inleiding

This guide will demonstrate removing the computer's processor.

Onderdelen

Geen onderdelen opgegeven.

  1. Place the case on its side.
    • Place the case on its side.

    • Locate and remove the two 13.1 mm thumbscrews.

  2. Slide the side panel towards the back and remove.
    • Slide the side panel towards the back and remove.

  3. Locate the processor's heat sink and fan.
    • Locate the processor's heat sink and fan.

  4. iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now

    iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now
  5. Remove the fan's power cable from the motherboard.
    • Remove the fan's power cable from the motherboard.

  6. Locate and unscrew the four Phillips #0 screws at the corners of the fan.
    • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

    • The screws will not come out completely.

  7. Remove the fan and heat sink.
    • Remove the fan and heat sink.

  8. Gently press down and release the silver lever.
    • Gently press down and release the silver lever.

  9. Open the metal casing over the processor.
    • Open the metal casing over the processor.

  10. Gently lift up the processor, holding by the edges only.
    • Gently lift up the processor, holding by the edges only.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

10 andere personen hebben deze handleiding voltooid.

James Aldag

Lid sinds: 20-10-11

339 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 6-8, Regan Fall 2011 Lid van Cal Poly, Team 6-8, Regan Fall 2011

CPSU-REGAN-F11S6G8

4 Leden

16 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 16

Altijd: 7,127