Inleiding

The purpose of this guide is to demonstrate how to locate and remove the 1150 Wireless MiniPCI Card.

Onderdelen

Geen onderdelen nodig.

Turn the laptop upside down and  locate the panel labeled C. Unscrew the single screw holding the cover in place. lift up the cover and remove it to exposed the Wireless MiniPCI Card.
  • Turn the laptop upside down and locate the panel labeled C.

  • Unscrew the single screw holding the cover in place.

  • lift up the cover and remove it to exposed the Wireless MiniPCI Card.

Voeg opmerking toe

Using a plastic spudger or similar, gently pry the grey and black wires off. The grey and black wires are the antenna wires so be careful not to damage them
  • Using a plastic spudger or similar, gently pry the grey and black wires off.

  • The grey and black wires are the antenna wires so be careful not to damage them

  • Gently pull the retaining clips away from the board so that the board pops up.

Voeg opmerking toe

Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees
  • Lift the board up and out of the mini PCI slot at an angle of about 35 - 45 degrees

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Teja

Lid sinds: 27-04-10

98 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 16-2, Maness Spring 2010 Lid van Cal Poly, Team 16-2, Maness Spring 2010

CPSU-MANESS-S10S16G2

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 5,449