Inleiding

This installation guide will help you with the following:

  • removing foam disk
  • decreasing the bass

Onderdelen

Geen onderdelen nodig.

Remove the ear pads by peeling them away from the grill.
  • Remove the ear pads by peeling them away from the grill.

Voeg opmerking toe

Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
  • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

Voeg opmerking toe

Remove the speaker from the grill by pulling it out.
  • Remove the speaker from the grill by pulling it out.

  • Remove the speaker carefully so you do not rip the wires out.

Voeg opmerking toe

Remove the foam disk from the grill by peeling it away from the grill. During reassembly, make sure that the speaker is angled into your ear canal.
  • Remove the foam disk from the grill by peeling it away from the grill.

  • During reassembly, make sure that the speaker is angled into your ear canal.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Melanie Reis

Lid sinds: 11-01-13

106 reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-19, Forte Winter 2013 Lid van Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 25

Altijd: 1,107