Inleiding

Remove the main fan from the case.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Voeg opmerking toe

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
  • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

  • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

Voeg opmerking toe

Remove the power cable from the fan and detach bracing.
  • Remove the power cable from the fan and detach bracing.

Voeg opmerking toe

Eindstreep

2 andere personen hebben deze handleiding voltooid.

Justin Petrilli

Lid sinds: 21-01-10

2.598 Reputatie

11 handleidingen geschreven

Team

Cal Poly, Team 13-24, Maness Winter 2010 Lid van Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 5

Altijd: 4,809