Repareer je spullen Gemeenschap Winkel

RedOctane X-Plorer Rear Case Replacement

Inleiding

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

Wat je nodig hebt

  1. RedOctane X-Plorer Rear Case Replacement, Rear Case: stap 1, afbeelding 1 van 2 RedOctane X-Plorer Rear Case Replacement, Rear Case: stap 1, afbeelding 2 van 2

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Bewerken

  3. RedOctane X-Plorer Rear Case Replacement: stap 2, afbeelding 1 van 3 RedOctane X-Plorer Rear Case Replacement: stap 2, afbeelding 2 van 3 RedOctane X-Plorer Rear Case Replacement: stap 2, afbeelding 3 van 3

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Bewerken

  4. RedOctane X-Plorer Rear Case Replacement: stap 3, afbeelding 1 van 3 RedOctane X-Plorer Rear Case Replacement: stap 3, afbeelding 2 van 3 RedOctane X-Plorer Rear Case Replacement: stap 3, afbeelding 3 van 3

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 6 andere bijdragers

Riley

Lid sinds: 04/18/18

649 Reputatie

7 handleidingen geschreven

Medailles: 9

+6 andere badges

Team

Cal Poly, Team S17-G1, Livingston Spring 2018 Lid van Cal Poly, Team S17-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G1

3 Leden

9 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 6

Altijd: 527