Repareer je spullen Gemeenschap Winkel

Razer Naga Epic Top Panel Disassembly

Inleiding

Instructions for how to disassemble the top assembly of the Razer Naga Epic mouse.

This is a relatively simple part of the device that houses the middle two buttons of the device as well as being responsible for bridging connections from the numpad to the mainboard.

Wat je nodig hebt

  1. Razer Naga Epic Top Panel Disassembly, Identify attachment points: stap 1, afbeelding 1 van 2 Razer Naga Epic Top Panel Disassembly, Identify attachment points: stap 1, afbeelding 2 van 2

    • The PCB is held to the top panel by...

    • 2 x 6mm Phillips #0 screws towards the front

    • 2 grooves on the top panel holding it in towards the rear

    Bewerken

  3. Razer Naga Epic Top Panel Disassembly, Unscrew the PCB: stap 2, afbeelding 1 van 1

    • Unscrew the 2 screws holding the PCB into the top panel.

    Bewerken

  4. Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: stap 3, afbeelding 1 van 3 Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: stap 3, afbeelding 2 van 3 Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: stap 3, afbeelding 3 van 3

    • Carefully slide the PCB horizontally away from the grooves on the rear end of the top panel.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Caius Nocturne

Lid sinds: 07/12/21

2.066 Reputatie

13 handleidingen geschreven

Medailles: 12

+9 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 8

Altijd: 41