Ga door naar hoofdinhoud

Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair

Wat je nodig hebt

  1. Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair, Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 1, afbeelding 1 van 3 Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair, Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 1, afbeelding 2 van 3 Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair, Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 1, afbeelding 3 van 3
    • To get to the maelstrom wiring you must first pull off the plastic cover.

    • To do this roll the maelstrom over so the rubber cover on the back is facing up. The rubber pad simply peels off exposing the metal backplate.

    • Then remove the four 8.5mm screws on the back plate of the maelstrom.

  2. Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 2, afbeelding 1 van 2 Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 2, afbeelding 2 van 2
    • Once the four screws are removed, the top cover can be lifted off.

    • There is a ribbon wire connecting the volume wheel to the circuit board. This is not permanently attached, and can be plugged back in if it gets pulled out.

    • Remove the three 2mm screws from the circuit board to separate it from the back plate.

  3. Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 3, afbeelding 1 van 2 Razer Megalodon – Virtual 7.1 Surround Sound USB Gaming Headset Maelstrom Wiring Repair: stap 3, afbeelding 2 van 2
    • The circuit board is now completely separate from the housing and the wires can now be inspected.

    • Peel back the tape on the wires to inspect any damage to the wires if there is any.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Kyle Schober

Lid sinds: 02/24/14

640 Reputatie

5 handleidingen geschreven

Team

Michigan Tech, Team 5-8, Lauer Spring 2014 Lid van Michigan Tech, Team 5-8, Lauer Spring 2014

MTU-LAUER-S14S5G8

3 Leden

13 handleidingen geschreven

4 opmerkingen

Well for the last step the wires I peeled the wires by burning them on a gas ranger. Worked Perfectly.

Edwin Lopez - Antwoord

can you provide the connection map for the cables that go prom remote root to headphones?

johnny1992black - Antwoord

comeon you wanna tell me you took picture of the cables from one side and the other one not this is a joke right?

johnny1992black - Antwoord

muchas gracias por este articulo, es el 2020 y me a servido mucho para arreglar mis audifonos

diego.riquelme.cortes - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 13

Altijd: 5,935