Repareer je spullen Gemeenschap Winkel

Razer Huntsman Tournament Edition Port Replacement

Inleiding

If your port is either wobbly or non-functional, use this guide to replace it. This guide should take a half hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

Wat je nodig hebt

  1. Razer Huntsman Tournament Edition Port Replacement, Keycaps: stap 1, afbeelding 1 van 1

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    Bewerken

  2. Razer Huntsman Tournament Edition Port Replacement: stap 2, afbeelding 1 van 2 Razer Huntsman Tournament Edition Port Replacement: stap 2, afbeelding 2 van 2

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    Bewerken

  3. Razer Huntsman Tournament Edition Port Replacement: stap 3, afbeelding 1 van 3 Razer Huntsman Tournament Edition Port Replacement: stap 3, afbeelding 2 van 3 Razer Huntsman Tournament Edition Port Replacement: stap 3, afbeelding 3 van 3

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    Bewerken

  4. Razer Huntsman Tournament Edition Port Replacement, Chassis: stap 4, afbeelding 1 van 1

    • Remove all of the keycaps with a keycap puller.

    Bewerken

  6. Razer Huntsman Tournament Edition Port Replacement: stap 5, afbeelding 1 van 2 Razer Huntsman Tournament Edition Port Replacement: stap 5, afbeelding 2 van 2

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    Bewerken

  7. Razer Huntsman Tournament Edition Port Replacement: stap 6, afbeelding 1 van 1

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    Bewerken

  8. Razer Huntsman Tournament Edition Port Replacement: stap 7, afbeelding 1 van 1

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    Bewerken

  9. Razer Huntsman Tournament Edition Port Replacement: stap 8, afbeelding 1 van 1

    • Disconnect the internal cable.

    Bewerken

  10. Razer Huntsman Tournament Edition Port Replacement, Port: stap 9, afbeelding 1 van 2 Razer Huntsman Tournament Edition Port Replacement, Port: stap 9, afbeelding 2 van 2

    • Unscrew the board with the port.

    • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

    • Move the cable out of the way for the second screw

    Bewerken

  11. Razer Huntsman Tournament Edition Port Replacement: stap 10, afbeelding 1 van 1

    • Detach the internal cable from the USB board.

    • Do this carefully.

    Bewerken

  12. Razer Huntsman Tournament Edition Port Replacement: stap 11, afbeelding 1 van 1

    • Remove the USB board.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Joseph O'Dowd

Lid sinds: 10/25/22

383 Reputatie

3 handleidingen geschreven

Medailles: 9

+6 andere badges

Team

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 Lid van UMass Dartmouth, Team 4-3, Sinclaire Fall 2022

UMASSD-SINCLAIRE-F22S4G3

5 Leden

7 handleidingen geschreven

Één opmerking

how do i get a new port and where

Guardian Suit - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 8

Altijd: 297