Ga door naar hoofdinhoud

Wat je nodig hebt

  1. Razer Blade Stealth 2017 Speaker Replacement, Battery: stap 1, afbeelding 1 van 2 Razer Blade Stealth 2017 Speaker Replacement, Battery: stap 1, afbeelding 2 van 2
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

  2. Razer Blade Stealth 2017 Speaker Replacement: stap 2, afbeelding 1 van 1
    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

  3. Razer Blade Stealth 2017 Speaker Replacement: stap 3, afbeelding 1 van 2 Razer Blade Stealth 2017 Speaker Replacement: stap 3, afbeelding 2 van 2
    • Use your fingernail to pry up and disconnect the battery from the motherboard.

  4. Razer Blade Stealth 2017 Speaker Replacement: stap 4, afbeelding 1 van 1
    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

  5. Razer Blade Stealth 2017 Speaker Replacement: stap 5, afbeelding 1 van 2 Razer Blade Stealth 2017 Speaker Replacement: stap 5, afbeelding 2 van 2
    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

  6. Razer Blade Stealth 2017 Speaker Replacement, Speaker: stap 6, afbeelding 1 van 2 Razer Blade Stealth 2017 Speaker Replacement, Speaker: stap 6, afbeelding 2 van 2
    • Use tweezers to disconnect the red and black speaker cables by lifting up on the pin-header.

    • The same process is used for both speaker connections.

    • Do not pull horizontally on the wires!

  7. Razer Blade Stealth 2017 Speaker Replacement: stap 7, afbeelding 1 van 2 Razer Blade Stealth 2017 Speaker Replacement: stap 7, afbeelding 2 van 2
    • Use a Phillips #00 to remove the two, 4mm screws on each speaker.

  8. Razer Blade Stealth 2017 Speaker Replacement: stap 8, afbeelding 1 van 3 Razer Blade Stealth 2017 Speaker Replacement: stap 8, afbeelding 2 van 3 Razer Blade Stealth 2017 Speaker Replacement: stap 8, afbeelding 3 van 3
    • Use a plastic spudger to pry the speaker(s) away from the chassis.

    • The speakers are glued to the chassis, making them difficult to remove.

    • The same process is used for both speakers.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Helene Willits

Lid sinds: 10-10-19

718 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team S11-G3, Regan Fall 2019 Lid van Cal Poly, Team S11-G3, Regan Fall 2019

CPSU-REGAN-F19S11G3

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 11

Altijd: 908