Repareer je spullen Gemeenschap Winkel

Razer Blade RZ09-0130 2015 Trackpad Button Replacement

Inleiding

This procedure is necessary because trackpad functionality is a core feature to any laptop. It should be noted that the root causes for trackpad problems within the Razer Blade RZ09-0130 2015 laptop are typically software related, so be sure that Windows and Razer Synapse is up-to-date before attempting to open the laptop. The bulk of this replacement comes from unscrewing the back panel using a T5 Torx screwdriver. Once the back panel is off, use a Phillips #0 screwdriver to remove the two screws holding the trackpad’s circuity.

Wat je nodig hebt

  1. Razer Blade RZ09-0130 2015 Trackpad Button Replacement, Back Panel: stap 1, afbeelding 1 van 2 Razer Blade RZ09-0130 2015 Trackpad Button Replacement, Back Panel: stap 1, afbeelding 2 van 2

    • Be sure to power off the device before beginning.

    • Use a Torx T5 screwdriver to remove the ten 3 mm screws along the edge of the back panel.

    Bewerken

  2. Razer Blade RZ09-0130 2015 Trackpad Button Replacement: stap 2, afbeelding 1 van 2 Razer Blade RZ09-0130 2015 Trackpad Button Replacement: stap 2, afbeelding 2 van 2

    • Remove the back panel from the laptop by sliding it away from the hinge.

    • This device is missing the battery. Make sure to detach the battery connector before proceeding with laptop repairs.

    Bewerken

  4. Razer Blade RZ09-0130 2015 Trackpad Button Replacement, Trackpad Button: stap 3, afbeelding 1 van 3 Razer Blade RZ09-0130 2015 Trackpad Button Replacement, Trackpad Button: stap 3, afbeelding 2 van 3 Razer Blade RZ09-0130 2015 Trackpad Button Replacement, Trackpad Button: stap 3, afbeelding 3 van 3

    • Detach the two connectors from the motherboard by gently pulling them directly out of their ports with your fingers.

    Bewerken

  5. Razer Blade RZ09-0130 2015 Trackpad Button Replacement: stap 4, afbeelding 1 van 2 Razer Blade RZ09-0130 2015 Trackpad Button Replacement: stap 4, afbeelding 2 van 2

    • Use a Phillips #1 screwdriver to remove the two 3 mm screws holding the trackpad's circuit board to the chassis.

    Bewerken

  6. Razer Blade RZ09-0130 2015 Trackpad Button Replacement: stap 5, afbeelding 1 van 1

    • Remove the trackpad circuit board by holding one end and gently lifting it upwards.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 5 andere bijdragers

Carson Kellerman

Lid sinds: 01/29/20

495 Reputatie

4 handleidingen geschreven

Medailles: 5

+2 andere badges

Team

Cal Poly, Team S18-G1, White Winter 2020 Lid van Cal Poly, Team S18-G1, White Winter 2020

CPSU-WHITE-W20S18G1

4 Leden

6 handleidingen geschreven

Één opmerking

Looking for that small ribbon cable, very hard to find, any clues?

serpentexotics - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 6

Altijd: 2,151