Inleiding

This guide will give a step by step walkthrough of how to replace an old seat cushion with a new one.

Onderdelen

  1. Loosen the seat clamp by pulling the black lever away from the frame. Once this is done, simply rotate the lever counter-clockwise to loosen the seat.
    • Loosen the seat clamp by pulling the black lever away from the frame. Once this is done, simply rotate the lever counter-clockwise to loosen the seat.

    • Stand on the right side of the bike while loosening the lever and make sure the bike isn't upside-down. This will prevent the seat from falling off during this process.

    Voeg opmerking toe

  2. Now that the seat is loosened, slowly pull up on the seat cushion until it is fully out of the frame. Next, place the seat on the ground.
    • Now that the seat is loosened, slowly pull up on the seat cushion until it is fully out of the frame. Next, place the seat on the ground.

    Voeg opmerking toe

    • Use an Allen wrench to unscrew the bolt that is holding the post to the seat cushion.

    Voeg opmerking toe

    • Now that the bolt is loosened, carefully pull the seat cushion from the post. Next remove the two riders as shown in the second image.

    Voeg opmerking toe

Conclusie

Now you are ready to reassemble the seat with your new cushion. Just follow these same steps in the reverse order. Thanks for taking the time to use this guide!

Één andere persoon heeft deze handleiding voltooid.

Dante Bozzini

Lid sinds: 26-09-12

35 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 7-49, Forte Fall 2012 Lid van Cal Poly, Team 7-49, Forte Fall 2012

CPSU-FORTE-F12S7G49

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 31

Altijd: 1,501