Ga door naar hoofdinhoud

Inleiding

Follow these steps to disassemble the plastic casing of the RIDGID R84015 X2 power drill.

  1. Remove the backplate. Using a Torx T20 screwdriver, remove the four screws attaching the back plate.
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. Remove the drill handle.
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. Remove the gear casing from the body. Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now

    iPhone Batterij Fix Kits

    Slechts $29.99

    Buy Now
  5. With your drill taken apart, move your attention to the trigger and forward reverse switch.
    • With your drill taken apart, move your attention to the trigger and forward reverse switch.

  6. Check to see that the forward reverse switch isn't broken.
    • Check to see that the forward reverse switch isn't broken.

    • NOTE: small tab on trigger fits into groove on forward reverse switch

  7. With the battery attached, check that the wires work when the trigger is pulled.
    • With the battery attached, check that the wires work when the trigger is pulled.

    • Put multimeter wires here.

    • If wires work and drill doesn't, the problem is with the motor.

  8. Make sure plastic is not broken and switch is not stuck.
    • Make sure plastic is not broken and switch is not stuck.

  9. Looks good, doesn't it?
    • Looks good, doesn't it?

Eindstreep

2 andere personen hebben deze handleiding voltooid.

Brian

Lid sinds: 12-04-10

97 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 15-48, Garner Spring 2010 Lid van Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Leden

5 handleidingen geschreven

Één commentaar

I was able to diagnose and fix my problem with my black and decker following your instructions. TY

boxingchaos2011 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 19

Afgelopen 30 Dagen: 61

Altijd: 10,597